Reclamation and cleaning generally refers to the first comprehensive and thorough cleaning after the decoration or painting of a new house. Therefore, it is also called engineering reclamation. In southern China, it is generally called wasteland cleaning.
1、 Preparation work for wasteland reclamation and cleaning:
（1） Tools used:
Large scale dust suction machine, multi-functional floor cleaning machine, glass set tools, extension rod, ladder, bucket, duster, dolomite shovel, scraper, water applicator, etc.
（2） Drugs used:
All round cleaner, glass cleaner, ceramic cleaner, ceramic cleaner, degumming agent, stain remover, acid cleaner, toilet cleaner, stainless steel cleaner, stainless steel brightener, household wax, etc.
2、 Construction procedure:
Engineering reclamation is the first cleaning project. Due to the construction projects often leave behind a lot of garbage and dirt, all kinds of stones on the ground, cement paste, paint, glass glue, water pollution, rust, etc., which must be cleaned in the reclamation work, so it is the most difficult, the most complex and the most laborious work. The quality of the reclamation project directly affects the day The quality and grade of post cleaning work, so it is very important to do a good job in opening up wasteland.
The procedure is as follows:
1. Firstly, clean up a small amount of construction and decoration waste left on the site;
2. Then use a high-power vacuum cleaner to remove dust from the top to the bottom, and clean the corners manually;
3. Glass cleaning (glass cleaning): first wipe the glass frame with a towel, then dip the diluted glass water solution with the water applicator, and evenly smear the glass from top to bottom. If there are stubborn stains, clean them with a shovel. After repeating the above procedures, scrape them from top to bottom with a scraper, wipe the water marks on the frame with a dry towel, and wipe the water marks on the glass with the machine skin.
4. Toilet cleaning: adhere to the principle of from top to bottom, first of all, recognize the material of toilet top, whether it is PVC or aluminum plastic board or paint, and then clean it with different cleaning methods according to different materials; clean the wall of toilet with cleaning ball or board brush, focusing on the gap of ceramic tile, and the glue mark, paint spot, cement stain on the surface of ceramic tile, etc; Clean the toilet ware with towel, clean various faucets and pipe fittings with stainless steel cleaning solution; clean the floor with floor washer, which is the corner of the floor, use cleaning ball and blade to remove the dirt and cement stains on the corner that can not be washed by the floor washer; finally, wipe the faucet and other pipe fittings with dry towel after checking if there is no omission.
5. Kitchen cleaning: wipe the kitchen with wet towel again, focusing on the floor and corners, kitchen utensils and various stainless steel pipe fittings, and then repeat with dry towel. Note: because the kitchen stainless steel pipe fittings are more, should be the key point of cleaning.
6. Cleaning of bedrooms and halls: dust the walls with dusters or vacuum cleaners, wipe lamps, switch boxes, smoke exhaust devices, air conditioning outlets, exhaust outlets, etc.
7. Wipe the door from the top to the bottom of the door with a professional cleaning agent; clean the door from the top to the bottom of the door with a special cleaning agent; clean the door from the top to the bottom of the door.
8. Floor cleaning: after finishing all the cleaning of the floor, the floor should be divided into wood floor, ceramic tile, or stone. After the separation, choose special detergent to dilute and start cleaning. The glue stains on the ground can be removed by blade, and the stubborn ones can be treated with glue remover; after the last process is completed, the foreman shall conduct a comprehensive inspection and leave the site after confirming that there is no left.
9. Corner line cleaning: wipe with towel, remove all kinds of glue mark and paint spots with blade.
3、 Acceptance of wasteland reclamation and cleaning
Acceptance standard for reclamation and cleaning:
Glass standard: It is clean, clean and free of stains.
Standard of toilet: The wall has no color difference, no obvious stains, no paint spots, no glue marks, clean and bright sanitary ware, bright and clean stainless steel pipe fittings, no dead corner, no omission and no peculiar smell on the floor.
Kitchen standards: The wall has no color difference, no obvious stain, no paint spot, no glue mark, the stainless steel pipe fittings are bright and clean, and the floor has no dead angle and omission.
Bedroom and lobby standards: The wall is free of dust and soil, the lamps and lanterns are clean, the switch box is clean and free of glue stains, and the air outlet and air conditioner outlet are free of dust and glue spots;
Door and frame standard: No glue stains, no paint spots, smooth touch, glossy, no dust on the door edge.
Ground standard: The wood floor has no glue stain and is clean; the ceramic tile has no dust soil, paint spot, cement stain and luster; the stone has no stain, no glue spot and high gloss.
He has long-term cooperation with Vanke, Wanke, Wanke, Wanke and Wanke.